Motor Servo Double Side Coil Lacing Machine Motor Production Machine
Double ends electric motor stator coil automatic lacing and binding machine .
This Automatic motor stator coil lacing machine is consist of machine body, needle, nozzle rotating part, needle fore and back movement,nozzle swing part, needle up and down movement part, stator indexing part,thread feeding,thread cutting part.
This stator coil lacing machine adopts servo driven system, CNC control design and HIM program.
The indexing is driven by servo system.
Different lacing mode could be set such as slot lacing, interval lacing, and fancy lacing.
Main spindle adopts servo control system.
The rotation speed can be set.
Two needles driven by servo system lace upper and lower coil simultaneously.
Machine can automatically feed thread and cut thread.
There is no need to tie a knot.
Tooling change is fast and convenient.
Stator stack length range is 50-130mm.
Lacing tension can be set, Production capacity ≤1s/slot.
Should be no copper wire snap and wire enamel broken.
Primary qualification rate ≥98.5%, after rework, the rate ≥99.5%.
This stator coil lacing machine adopts safety grating protection system.
Operator need to stand when operating.
The stator coil lacing machine is suitable for lacing the oven-hang of the induction motor stator.
It is used for stator which meets the specification of below.
The stator coil lacing and binding machine is suitable for air conditioner motor, washing machine motor, compression motor, fan motor, generator motor and pump motor.
||Automatic motor stator lacing machine
|Stator stack length
|Min. stator ID
|Max. stator OD
||1600 x 700 x 1680mm