electric motor winding equipment

Customized Electric Motor Winding Machine , Alternator Winding Machine Information needed for rotor production line inquiry It will be better if customer could send us detailed drawing including below information. 1. Rotor lamination drawing 2. Rotor assemble drawing 3. Rotor stack drawing 4. Rotor winding diagram drawing: with rotor wire diameter and turn number 5. Commutator drawing 6. Shaft drawing 7. Required residual unbalancing volume and initial unbalancing volume 8.

Induction Motor Winding Machine / Automobile Motor Wiper Stator Integrated Testing Machine High-strength vacuum chamber: high structural strength of the vacuum chamber, which can meet between 0 ~ -90kPa turns testing requirements; A multi-purpose machine: the vacuum can be used for the inter-turn test, can also be used between the vacuum turns + performance testing can also turn off the vacuum mode, as normally the provisions of sub-test equipment; De-embedding Location: can

Electric Motor Winding Machine For Car Generator Alternator SMT - LR100 / LR200 Adopts special purpose controller to realize the function of auto winding, auto arraying, slot acrossing, auto getting through wax tube and output setting, etc. This machine is suitable for winding the coil for big power motor. The tooling could be auto extend and retract. Therefore, it is no need to discharge the tooling when taking out the finished coil. Thus it can reduce the labor and improve

SMT - DR1200 Electric Motor Winding Machine , Automatic Ceiling Fan Winding Machine Ceiling Fan Coil Winding Machine is suitable for winding ceiling fan stator, external armature such as frequency conversion alternator and generator armature. Description: Ceiling Fan Coil Winding Machine has two working stations. Controlled by micro computer, it could achieve auto winding, auto array, auto indexing; array and indexing is controlled by stepping motor, winding is controlled by

Multiple- Head Automatic electric motor coil winding machine With 8 Stations 1. Machine features: It is an eight-station coil winding machine suitable for all kinds of frame winding,electronic winding and combined motor winding; obtain functions of automatic winding, wire arraying, slot skipping,turn number, steps and wire diameter setting, etc.; Wire holder is controlled by magnetic damping tensioner; wire tension is stable and dajustable based on wire diameter; orderly wire

Double-station Motor Winding Machine for Electric Motor AC / DC Production SMT-SR350 Technical Parameters Model SMT-SR350 Wire diameter 0.3mm~1.2mm Winding form diameter 380mm Winding head 2pcs Transfer distance 250mm Unload winding speed 1500r/min Air pressure 0.4MPa Power supply 220V/50/60Hz 1.5Kw Weight 900Kg Dimension (L)2000(W)1450(H)1500mm Brief Instruction of Machine Machine "Double-station Motor Winding Machine for Electric Motor AC / DC Production" is used

Auto Stator Coil Winding Machine for Electric Motors with Much Broader Scope SMT-LR150-II Equipped with one winding head and two stations with turntable structure. It can wind coils directly and orderly into transfer cup, which is controlled by six servo motors. If producing stator coils by this kind of machine, it will be eaiser to insert coils of stators with high slot fill factor & small slot opening width. To some degree, it can save labor effecitvely. (1) Technical

3 Winding Heas Coiling Copper Wires for 3 Phase Motor Winding Stator Making SMT-R350 Equipped with 1 - 3pcs winding head, which can wind 3 group coils at one time automatically. Comapred with other winding machines, this kind of machine is simpler and cheaper which is convenient for maintenance. Operator need to unload coils manually. (1) Technical Parameters Model SMT-R350 Wire diameter 0.2~1.5mm Winding form diameter 350mm Parallel wire no. 16pcs Winding head 1~3pcs

Electric Motor In-slot Stator Needle Winding Machine with Wire Protection SMT-NR1405 Can be equipped with 3 needle (wire nozzle) for winding at the same time, just one station with oter ring protection. It can achieve auto wire hooking, cutting, arraying and winding on stators directly. (1) Technical Parameters Model SMT-NR1405 Needle number 1~3 needles Stator OD 140mm Stator ID 30mm Stator stack height 80mm with plastic frame Wire diameter range 0.08~1.0 mm Load