stator coil winding machine

Stator Coil Middle Winding Forming Machine With Protection SMT - ZJ160 It is suitable for air conditioner motor, washing machine motor, compression motor, fan motor, generator motor and pump motor. (1) Main Technical Features Model ZJ160 Stator I.D. 31 -101mm Stator O.D. 160mm Stack Height 16-100mm Displacement of cylinder 20F MOQ 1 Set Mid - Forming Machine Power Supply 380V/50/60Hz 3.75Kw Weight 1000kgs Machine dimension (L)1200*(W)750*(H)2500 (2) Application The products

Full - Automatic Automatic Stator Forming Machine / Coil Forming Machine Required information for quotation: stator drawing before forming and after forming, including stator O.D, stator I.D, stator stack height, and end coil dimension. (1) Main Technical Date Model ZZ190 Stator I.D. 50-131mm Stator O.D. 191mm Stack Height 20-160mm Displacement of cylinder 20F MOQ 1 Coil Forming Machine Power Supply 380V/50/60Hz Kw Weight 1500kgs Machine dimension (L)1950*(W)1100*(H)2500mm

Coil Forming Machine Big Dimension Heavy Weight Stator SMT - ZJ300 Do not operate machine during its maintenance, stop running machine and cut off the power. That other than specified personnel do not operate the machine, and two people operate the machine at the same time is forbidden. It is prohibited that operate machine and touch the electrical parts by wet hands, probably may cause electric shock. The operator can not leave away when the machine is running, should keep

Hydraulic Pneumatic System Automatic Final Coil Forming Machine For Motor SMT - ZZ160 1. The machine uses plastic vane pump as a power source, the fast speed torque, each mechanical action is completed by the hydraulic system and pneumatic system. 2. The control circuit by Mitsubishi PLC and text display components, circuit is simple, reliable, can be divided into automatic, manual and single-step operation of the three methods. 3. The machine adopts the overall design, the

Horizontal type Big power long stack length pump stator coil middle forming machine (1) Main technical data Stator OD 300mm Stator ID 200mm Stack Height 600 mm Height of Coil 70mm Pitch time 30s/pc Displacement of Cylinder 50L/min Power supply 380V 50/60Hz 4Kw Weight 2500Kg Dimension (L)4400(W)1850(H)1350mm (2) Application It is applied to deep water pump motor and other various type of big dimension stator. (3) Machine mainfunction and characteristic This machine is

Automatic Motor Stator Coil Making Machine , Motor Winding Equipment 1. The machine should be installed in the environment with clean air, and suitable humidity. 2. The stepping motor should be keep clean, avoid impaction by hard things. 3. Regularly lubrication. This machine adopts imported lubrication system; fill the oil tank with 40 # oil. It can be judged whether it needs refuel or not through view hole. 4. The critical part of the machine adopts imported high-precision

3Kw Automatic Stator Coil Inserting Machine KW300 Model 380V (1) Main Technical Features Model KW300 Stator I.D. 110-210mm Stator O.D. 175-300mm Stack Height 250mm Tooling Travel 70mm Appropriate Wire Diameter 0.2-1.2mm Slot number range 8-48slot Power Supply 380V/50/60Hz 4Kw MOQ 1 set Motor Wire Inserting Machine Machine dimension (L)1000*(W)2000*(H)2000mm (2) Application The products are mainly applied in new energy automobile motor, servo motor, generator, three-phase

Electric Motor Winding Machine For Car Generator Alternator SMT - LR100 / LR200 1. A kind of single-head and double-station automatic winding machine; 2. automatic put the coil into transfer orderly; 3. especially suitable for high slot filling rate, small notch stator; winding mode such as automatic skip, automatic cutting and automatic indexing can be set in human-machine interface, winding tension is adjustable; 4. obtain continuous or discontinuous winding way and meets

Automatic Stator Winding Coil Forming Machine with Slider SMT - ZZ160 -2 It will be better if customer could send us detailed drawing including below information. 1. Stator lamination drawing 2. Stator stack drawing 3. Stato winding drawing 4.Required productivity 5. Other technical requirement If possible, it will be better if customer can send us samples. (1) Main Technical Features Model ZZ160-2 Stack height 190mm Stator I.D 80-120mm Stator O.D 60-120mm Displacement of