stator coil winding machine

Automatic Coil Winding Machine for AC Motor Induction Motor This machine mainly used for the 2 poles stators winding. One stator will be winded in each cycle, greatly improving production efficiency, automatic loading and removing mould, to reduce artificial labor intensity. Winding process can realize tapping(5 times), clamping functions, the stroke and pivot angle of fly fork lever stroke can be adjusted within a certain range according to need. Total aluminum alloy(anodic

Electirc Generator Motor Stator Automatic Coil Winding Machine ISO9001 / SGS 1. The machine inserts coil and wedge simultaneously, coil insertion is controlled by servo motor system , and wedge insertion by variable frequency motor. 2. It is controlled by HMI, and machine can diagnose breakdown automatically. 3. This machine is suitable for Polyester Film wedge roll material with fixed thickness and fixed width (width and thickness dimension is provided by customer) 4. The

1.5Kw Stator Winding Machine / Air Conditioner Motor Coil Winding Machine 1. The machine should be installed in the environment with clean air, and suitable humidity. 2. The stepping motor should be keep clean, avoid impaction by hard things. 3. Regularly lubrication. This machine adopts imported lubrication system; fill the oil tank with 40 # oil. It can be judged whether it needs refuel or not through view hole. 4.The critical part of the machine adopts imported high

Fan Motor Stator Coil Inserting Machine 60-150 mm Stator ID ISO / SGS Audit Application: It is suitable for stators applicated in single phase motor, three phase motor, compressor motor, starter motor, washing machine motor, air condiction ect. Information needed for stator winding inserting machine inquiry It will be better if customer could send us detailed drawing including below information. 1. Stator lamination drawing 2. Stator stack drawing 3. Wire connection drawing 4

Stator Coil Insertion Machine Horizontal Three Phase White Color With horizontal frame design, controlled by industrial programmable PLC. It is used for winding and wedge automatically inserting. It adopts AC servo motor driving system, AC frequency conversion speed regulation system, pneumatic system. It can achieve wedge length setting, feeding, cutting, forming and inserting into stator together with coil automatically. Coil inserting speed can be set at different section.

Stator coil shaping machine middle forming machine Adopt horizontal structure, pneumatic system as main power; stator with same slot width and internal diameter can share one tooling, stroke of both ends of expanding blades is synchronous, no need two times expending, and expending blade stroke can be adjusted as per requirement; footswitch controls on/off, easy operation, and no damage to wedge, insulation paper and coil, wedge is still at right position after expending. (1)

Automatic Motor Stator Coil Forming Machine The Stator Coil Forming Machine is designed for efficient stator coil forming, featuring a hydraulic system drive with PLC control. Its flexible tooling design utilizes inner expansion principles for precise outer wrapping and edge forming of stator windings, ensuring proper dimensions after lacing. This high-performance machine delivers exceptional forming quality with outstanding efficiency. Required Information for Quotation:

Automatic Coil Winding Machine For Rotor And Stator AC Motor ODM/OEM SMT-DR08 (1)Main Technical Parameter Model DR08 Wire Diameter 0.08-0.8mm No - load Speed 3000r/min Winding head 8pcs Diameter of frame 20-120mm Max.Transfer distance 250mm Air Pressure 0.4MPa Power Supply 220V/50/60Hz 0.75Kw Weight 850kgs Dimension (L)1500*(W)1200*(H)2100mm (2) The operation steps of this machine Around 1000pcs/8 hours,it is only a rough idea, depends on the armature slots number and turn

Automatic Coil Winding Machine PLC Displayer 0.2~1.0 MM Wire Diameter This machine is primarily designed for winding 2-pole stators, completing one stator per cycle to significantly enhance production efficiency. It features automatic loading and mold removal to reduce labor intensity. The winding process supports tapping (5 times) and clamping functions, with adjustable fly fork lever stroke and pivot angle. The frame is constructed from anodized aluminum alloy with imported