wedge inserting machine

Induction Motor Winding Machine coil inserting Drift Form SMT - I 1. The CID-6 offers semi-automatic linear stator handling and simultaneous forming of both end turns. 2. The SCI-16 uses our unique roll form wedgemaking system which reduces the working height and cost of these long toolings. 3.The CIH-12 features automatic stack adjust and wedge notching. The forming bullet extends and retracts to reduce the handling time.and give flexibility for expanding inner shoe endturn

Motor stator Inserting And Drifting Machine Max 120mm Core Length 1. The CID-6 offers semi-automatic linear stator handling and simultaneous forming of both end turns. 2. The SCI-16 uses our unique roll form wedgemaking system which reduces the working height and cost of these long toolings. 3.The CIH-12 features automatic stack adjust and wedge notching. The forming bullet extends and retracts to reduce the handling time.and give flexibility for expanding inner shoe endturn

Three Phase Motor Stator Full-Automatic Coil Winding Insertion Equipment 1. More suitable for winding the stator coil embedded in a longer line, after a good embedded coil windings arranged in neat rows. 2. Coil winding wire is not easy to injury, the machine uses a needle to thread embedded insulating paper and disposable embedded in the stator coil, high-speed embedded line efficiency. 3. The machine has a manual, single-step, automatic three kinds of work, to facilitate

Servo Stator Winding Machine / Motor Stator Coil Winder OEM / ODM 1. It is automatic horizontal coil inserting machine and employs an AC servo motor driven system, an AC frequency conversion speed regulating system, a pneumatic and a PLC integrated control system. 2. Besides, it is endowed with the functions of auto slot wedge feeding at a sixed length, cutting, forming and inserting into stator with coil and so on. The inserting speed of coil can be set piecewise. 3.

Economic Type Fan Cooler Motor Stator Coil Forming Machine SMT - KZ160 After coil insertion process, the upper and bottom side of coil will not be the same shape. Therefore, coil forming will be needed before next process. After forming, the coil will be expanding and easy for the next time insertion. Both slot paper and wedge should not be damaged or turned over. The stator should not be deformation or stator lamination should not be upward. There is no wire enamel broken.

SMT - ZJ160 Motor Stator Coil Forming Machine Hydraulic Pneumatic System This machine is used for the preparing process of twice coil inserting craft. It adopts the mode of internal expanding and external collecting to pre-forming the inner bores, excircle and end height of coils at both ends of the motor stator, with single-tooth slot insulation protective device. Its working principle is: expands the coils covering on the slots entirely through the expanding blades of the

Electric Hoist Motor Stator End Coil Final Forming Machine SMT - ZZ160 -2 Information needed for stator production line inquiry It will be better if customer could send us detailed drawing including below information. 1. Stator lamination drawing 2. Stator stack drawing 3. Stator winding drawing 4. Winding distribution drawing 5. Wedge and insulation paper drawing and its material 6. Stator application (1) Main Technical Features Model ZZ160-2 Stack height 190mm Stator I.D

Stator coil shaping machine middle forming machine This machine adpots flexible principles of inner expansion, out wrapping and edge forming to form the stator coil. It can ensure appropriate winding outside dimension after lacing. Both slot paper and wedge should not be damaged or turned over. The stator should not be deformation or stator lamination should not be upward. There is no wire enamel broken. (1) Main Technical Date Model ZJ300 Stack height 70- 250mm Stator I.D

Full - Automatic Automatic Stator Forming Machine / Coil Forming Machine Required information for quotation: stator drawing before forming and after forming, including stator O.D, stator I.D, stator stack height, and end coil dimension. (1) Main Technical Date Model ZZ190 Stator I.D. 50-131mm Stator O.D. 191mm Stack Height 20-160mm Displacement of cylinder 20F MOQ 1 Coil Forming Machine Power Supply 380V/50/60Hz Kw Weight 1500kgs Machine dimension (L)1950*(W)1100*(H)2500mm