coil insertion machine

ISO / SGS Audit Automatic Motor Winding Machine for Simple Wedges 1. It is suitable exclusively for large and medium-size motors. 2. This machine is characterized by low noise, fast speed, excellent forming, 3. it is convenient and easy for different slot number stator production and changing tooling. 4. It is suitable for generator, deep pump motor, three phase machine, etc. (1) Main Technical Data Model SC80 Stator I.D. 40-80mm Stator O.D. 160mm Stack Height of Stator

Stator End Turns Head Lacing Machine with Vertical Structure SMT - DB100 This lacing machine is consist of machine body, needle, nozzle rotating part, needle fore and back movement, nozzle swing part, needle up and down movement part, stator indexing part, thread feeding,thread cutting part. It has a mechanical cam operated drive system to keep a perfect phasing of the needle movement during the lacing cycle. Machine is controlled by PLC, different stator slot configurations

Motor Stator Servo Double Side Coil Lacing Machine Motor Production Machine SMT - DB160 Each lacing machine is PLC controlled with an inverter drive and can be fully programmed to suit different stator slot configurations. Stator support tooling is very quick to changeover between different stator laminations and stack heights. A wide range of standard lacing needles are available. This lacing machine is suitable for lacing multi-species, less yield or more lead wire stator.

Coil Head Lacing / Binding Machine with Turntable & Double Lacing Needles SMT - SBZ160 Induction Motor Winding Lacing Machine, 2 working stations, 2 lacing needles binding coil heads at the same time, can fix coil heads and keep them in good shape. Different lacing modes are settable accordingly. With fast speed, low noise, simple operation and easy tooling change. It can be combined with robots together for full-automatic production line. (1) Main Technical Information Model

Slot Insulation Insertiong Machine Special for Variable Frequency Motor Staor SMT-CB160 A new type automatic Slot Insulation Machine, especially suitable for series motor stator insulator insertion. (1) Technical Parameters Model SMT-CB160 Stack height 50mm Stator ID 50mm Stator OD 160mm Cuff height 2~5mm Slot size 268 Lamination thickness 0.35mm Cycle time 5s/slot Power supply 380V/50(60)HZ 3.5KW Air pressure 0.6~1MPa Weight 800Kg Dimension (L)1340(W)1900(H)1400mm

Hot Selling Stator Coil Lacing Machine with Turntable for Binding Winding Heads SMT - SBZ160 (1) Main Technical Information Model SBZ160 Stack Height 15-120mm Stator I.D. 25-100mm Stator O.D. 160mm Height of coil 40mm Lacing Mode Slot by slot/interval slot/Fancy lacing Lacing Speed about 0.45s/s Power Supply 380V/50/60Hz 3.5Kw Weight 1500kgs Machine dimension (L)1950*(W)1050*(H)2050mm (2) Brief Instruction of Machine Machine "Hot Selling Stator Coil Lacing Machine with

Double Sides Motor Stator Coil End Automatic Lacing Machine / Lacing Machine SMT - BZ190 1. Loading stator vertically; 2. equipped with pressing, automatic feeding, automatic cutting device, etc.; 3. overhang winding adopts twin needle lacing by servo system simultaneously; 4. needle transposition, hooking and stator indexing are controlled by servo system; 5. spindle adopts frequency speed control; 6. slot by slot lacing, interval lacing and fancy lacing could be achieved

Motor Stator Servo Double Side Coil Lacing Machine Motor Production Machine SMT - DB160 Stator is loaded on Single-head Winding Lacing Machine vertically; PLC programming; single-needle and single-side automatic lacing; needle transpositioning, hooking are controlled by servo system; spindle adopts frequency speed control; slot by slot lacing, intercal lacing, and fancy lacing could be achieved by setting in human-machine interface; especially apply to multi sizes, low output

Compression Coil Wire Binding Machine With PLC and touch Screen SMT - DB100 Loading stator vertically; equipped with pressing, automatic feeding, automatic cutting device, etc.; overhang winding adopts twin needle lacing by servo system simultaneously; needle indexing, hooking and stator indexing are controlled by servo system; spindle adopts frequency speed control; slot by slot lacing, interval lacing, and fancy lacing could be achieved by setting in human-machine interface